Cavecool Affection Onyx CC168DB User Manual - Page 10

Browse online or download pdf User Manual for Wine Cooler Cavecool Affection Onyx CC168DB. Cavecool Affection Onyx CC168DB 12 pages.
Also for Cavecool Affection Onyx CC168DB: User Manual (16 pages)

Print Page

UPPER CHAMBER

Temperature control ranges from 5-12°C (40-54°F).

LOWER CHAMBER

Temperature control ranges from 12-22°C (54-72°F).

NOTICE: It is strongly advised to maintain a difference of 7-8°C between the two

temperature zones in order to allow the temperature sensors to operate properly.

After the wine cooler is plugged in, the temperature will be set automatically as 5°C (40°F)

for upper chamber and 12°C (54°F) for lower chamber.

The last set temperature will be memorized automatically by the system in the process of

normal operation in the event of power supply cutting.

After set temperature is locked, it will flash for 3 seconds, indicating the actual temperature

inside the cabinet. Afterwards, temperature inside the cabinet will reach the set temperature,

fluctuating around ± 2,5°C of set temperature which is regarded as normal.

Alarm system:

When faults of cooling system occur and temperature inside the cabinet elevates to ≥ 30°C

(86°F) for more than 2 hours, the alarm system will start, the cooling system will be

automatically shut off with the buzzer buzzing intermittently.

Notes before installation.

• Remove all the packing materials inside and outside the wine cooler.

• The cabinet must be stand in vertical position for at least 6 hours prior power

connection, in order to avoid and prevent harm to the cooling system.

• Clean the exterior of the cabinet with soft cloth soaked in warm water.

Attention points for installation.

• This wine cooler is designed for free-standing or as built-in.

• Please place the cabinet on a solid ground suitable to support full load of wines.

• Adjust the two supporting feet on the front of the cabinet to make the cabinet at

perfect plumb and level.

• Please do not place your cabinet close to heating appliances such as furnace, stove

and radiator. These items will increase power consumption of the cabinet.

• Avoid installing the cabinet in a damp and humid environment.

• The more ventilation available around the wine cooler, the better the performance.

INSTALLATION INSTRUCTIONS

- 10 -