ELRO CZ60RIP11S Manual - Page 13

Browse online or download pdf Manual for Security Camera ELRO CZ60RIP11S. ELRO CZ60RIP11S 19 pages. Camera security set
Also for ELRO CZ60RIP11S: Quick Start Manual (2 pages)

Print Page

4.4.1 Motion Detection – Sensitivity/area

You can set the sensitivity (High - Low - Off) and the area to be scanned for each

camera in this menu. This function is mainly used to make the detection as specific as

possible. In the image of the camera, areas can be excluded, so that for example

moving trees are not the cause of detection.

4.5.1 Network setup

Here you can choose DHCP Dynamic Host Configuration Protocol or STATIC (fixed) IP

address. DCHP is the most common connection. Your router automatically assigns an IP

address to your system. Static IP is for those who have the ability to specify an IP

address for their system.

4.5.2 Network setup

This function resets the system to the default password "000000".

A new password can only be set via the app.

4.5.3 Network setup

Here you will find your network information, nothing can be changed or set

4.6 Upgrade

Here you can choose to upgrade the firmware using a SD card or the Internet.

Extensive setup

–

Reset password

–

Information

–

- 12 -