4IPNET EAP740 Handbook - Page 8

Browse online or download pdf Handbook for Wireless Access Point 4IPNET EAP740. 4IPNET EAP740 19 pages. Enterprise access point

Print Page

Power LED

2.4G LED

5G LED

Uplink LED

LAN LED

12V

2 A

Uplink (PoE) Port

LAN Port

Console Port

Restart / Reset

USB Port

EAP740 status. The Status LED will start blinking when the restart/reset button

is pressed. For the first 5 seconds, the LED will blink slowly (restart), and after 5

seconds, the LED will start blinking quickly (reset).

2.4G Wi-Fi status. The 2.4G LED will blink when there is 2.4G traffic.

5G Wi-Fi status. The 5G LED will blink when there is 5G traffic.

Uplink status. The Uplink LED will light up when there is traffic passing through

the Uplink port.

LAN status. The LAN LED will light up when there is traffic passing through the

LAN port.

Attach power adaptor here.

Offers uplink connection. This port can be used to connect to a controller,

gateway, or directly to the Internet. 802.3af PoE is also supported.

The ports for connections with LAN side devices.

To access EAP740 via the console interface.

Press once to restart the system; to reset the system to factory default settings,

hold for more than 5 seconds.

USB interface reserved for future use.

EAP740 Enterprise Access Point

Handbook

ENGLISH