Elsat iNode:0x0809 Instruction Manual - Page 7
Browse online or download pdf Instruction Manual for Accessories Elsat iNode:0x0809. Elsat iNode:0x0809 15 pages. Care sensor pht
Print Page
iNode Care Sensor PHT – instruction manual
The picture below shows the Hygrometer tab:
The following items can be set:
Alert if humidity is:
no alarm: the device does not respond to humidity changes.
greater than: device sends an alert in case a set threshold humidity value is exceeded.
less than: device sends an alert in case a set threshold humidity value is exceeded.
out of range: sends an alert in case a crossing one of the set humidity threshold.
in range: device sends an alert, in case that the humidity is between set humidity values.
You can change the humidity threshold value or values in the range from 1 % to 99 %.
Archive alerts: the device saves the time of the beginning and end of any of the events selected
above.
Archive humidity: the device keeps the record measured humidity every 1 minute.
Humidity correction: the user can adjust the measured humidity in the range from-20 % to 20
% with a resolution of 0.5 %.
You can save modified settings by pressing the Write button.
ELSAT s.c.
page 7