Datajack U600 User Manual - Page 7

Browse online or download pdf User Manual for Modem Datajack U600. Datajack U600 14 pages. Usb modem

Print Page

How do I connect to the DataJack 3G or 4G network via the SmartView software?

Follow these steps to connect to a Network:

If you have not already done so, connect the DataJack U600 USB Modem. SmartView will begin



searching for an available network.

If you want to switch from 3G to 4G (or vice versa), click the Switch to 3G or Switch to 4G button. You



can also select Change Device Mode from the Tools menu. There may be a few seconds delay while

the device switches between 3G and 4G modes.

When SmartView is ready, the Connection Status Text on the Mobile Control Panel will display ―Ready:‖



followed by the name of the network that has been selected. Click the Connect button to establish a

connection.

If I lose coverage or remove the USB U600 during a file download, will the download resume when the

device is inserted and within 3G or 4G coverage again?

No. You will need to re-establish a connection to the network and restart the file download. Some third party

applications provide the capability of continuing a file transfer after a lost connection.

If I want to connect automatically versus manually via SmartView software, how is that accomplished?

By default, Automatic Mode is Off. You must click the Auto mode button in order to set SmartView to

automatically select an available network and establish a connection based on the priorities specified in the

Network Profiles window. Manually connecting to a network will disable automatic connection. The Auto

button will dim to indicate that automatic connection has been disabled and SmartView will no longer establish

connections automatically. However, you can return to automatic mode by clicking the Auto button.