Elsema MD240-2 Manual - Page 7
Browse online or download pdf Manual for Security Sensors Elsema MD240-2. Elsema MD240-2 9 pages. Vehicle loop detector
Print Page
Dip switch 6 and 7 of CH2
Dip switch 6 and 7 is
OFF
Dip switch 6 is ON
Dip switch 7 is ON
Dip switch 6 and 7 is
ON
Setup Instructions
Power Led
RED power LED indicates "Power ON"
Detecting Led
Continuously On: Indicates vehicle detection.
Blinking slowly: Indicates loop is short circuit or the number of twists after the loop is not enough.
Blinking fast: Indicates loop is open circuit or too many twists after the loop.
Power : Red Led
CH1
Green Led
CH2
Frequency Selection
If it is fully lit, power is supplied.
If it is fully lit, a vehicle is detected on loop 1. If it blinks, then loop 1 is
If it is fully lit, a vehicle is detected on loop 2. If it blinks, then loop 2 is
- 7 -
Function
High
Medium-High
Medium-Low
Low
faulty.
faulty
ELSEMA
MD240-2 Vehicle Loop Detector