Cayin CS-100CD Quick Start Manual - Page 14
Browse online or download pdf Quick Start Manual for CD Player Cayin CS-100CD. Cayin CS-100CD 15 pages.
Print Page
No sound.
The function of the remote
control is not sensitive
Can't lock the SPDIF signal
Can't lock the coaxial
signal
Computer can't recognize
the device
The sound is abnormal
when the input status is
USB
The disc cannot be
identified
The signal cables are not
connected well.
Just turning on the CD
player, the vacuum tubes
have not been preheated
for enough time.
Disturbed by something in
surrounding
The batteries don't have
enough power
There are obstacles
between the remote control
and the unit
SPDIF
cable
is
connected well
No SPDIF signal input
Coaxial
cable
is
connected well
Coaxial cable do not meet
the requirements（75Ω）
No coaxial signal input
The USB line is not
according to the USB2.0
specification
USB driver has not been
installed
USB driver error
USB socket error
Computer is too busy
The hardware resource of
computer is too low
14
Play the discs that can be
identified by the player.
Connect the signal cables
well.
Wait for about 30 seconds after
turning on power.
Remove the disturbing source
Replace the batteries
Remove the obstacles
not
Connect the SPDIF cable well
Check if there are any SPDIF signal
output from the SPDIF output
device
not
Connect the coaxial cable well
Replace the coaxial signal line
Check if there are any coaxial
signal output from the coaxial
output device
Replace the USB line
Install the USB driver
Restart the computer
Choose another USB socket
Reduce the running application
program
Upgrade the computer if necessary