Datalogic CBX500 Installation Manual - Page 7

Browse online or download pdf Installation Manual for Barcode Reader Datalogic CBX500. Datalogic CBX500 17 pages. Scanning connection box
Also for Datalogic CBX500: Installation Manual (16 pages), Installation Manual (17 pages)

Print Page

ELECTRICAL CONNECTIONS AND SETUP

The following figure shows the typical layout.

Reading Device

Configuration PC

The dotted line in the figure refers to an optional (temporary) hardware configuration in which

a portable PC can be quickly connected to the CBX500 (and consequently to the reading

device auxiliary interface) through the internal 9-pin connector. This allows monitoring of the

data transmitted by the reading device or configuration through the utility program (see the

reading device Installation Manual for more details). The reading device auxiliary interface

signals are also available on the internal spring clamp connectors.

After making system cabling and switch settings, connect the reading device to the 25-pin

connector on the CBX500 housing.

Switch ON the CBX500 power switch (see Figure 3). The Power LED turns on (blue) when

the power connection has the correct polarity. The Power LED turns on (red) in case of

wrong polarity.

After system functioning has been verified, close the CBX500 using the four cover screws.

PWR

PS, I/O, Main Interface

Scanner

Auxiliary

Interface

Figure 2 – System Layout

CBX500 INSTALLATION MANUAL

CBX500

Scanner