Elsner 30167 Installation And Adjustment - Page 11

Browse online or download pdf Installation And Adjustment for Weather Station Elsner 30167. Elsner 30167 16 pages.

Print Page

3.4.1. Position of the sensors

Fig. 10
1
Precipitation sensors (4 surfac-
es with conductor tracks)
2
Brightness sensors under
plastic domes, directed to-
wards
a - North
b - East
c - South
d - West and up (sky)
3
Pressure sensor
4
GPS module
5
Wind sensor with ultrasonic measuring sections
a - North-east/South-west
b - South-east/North-west
6
Temperature and humidity sensor in the base

3.5. Connection to RS485 bus

The connection to the RS485 bus and the auxiliary voltage is via the bushing in the
base (See "Device connection" on page 6.).
Connect the loose end of the connection cable to the RS485 bus and the mains unit
(auxiliary voltage). Use the junction box and terminals provided.
RS485 data:
A
White
B
Yellow
Set the voltage to 24 V DC b turning the adjusting screw on the mains unit (fig. 11, no.
1) fully to the left.
Overvoltage protection installed on site is recommended.
Weather Station Suntracer RS485 pro • Version: 20.09.2021 • Errors excepted. Subject to technical changes.
9
1
2d
5a
1
2c
South
Auxiliary voltage:
+24 V Red
GND Black
Installation
North
2a
1
3
5b
2b
6
4
1