Datalogic DS4800 Quick Reference Manual - Page 4
Browse online or download pdf Quick Reference Manual for Barcode Reader Datalogic DS4800. Datalogic DS4800 16 pages.
Also for Datalogic DS4800: Quick Reference Manual (13 pages), Quick Reference Manual (13 pages)
Print Page
Model Description:
Technical Features:
ELECTRICAL FEATURES
Supply Voltage
Current Consumption
maximum
Communication
Interfaces
Inputs
Ext. Trigger, Encoder,
2 aux. digital inputs
Outputs
3 software
programmable digital
outputs
SOFTWARE FEATURES
Readable Code
Interleaved 2/5
Symbologies
Code 39 standard
Codabar
Code 128/EAN 128
Code 93 (standard & full ASCII) Humidity
EAN/UPC
Code Selection
Up to 10 codes during one
reading phase
Headers and
Up to 128-byte headers and
Terminators
128-byte terminators
Operating Modes
Pack-Track™
Config. Mode
Genius™ utility program
Parameter Storage
Non-volatile internal FLASH
Note 1: The features given are typical at 25 °C ambient temperature (if not otherwise indicated).
4
DX8200 Controller - X 0 X X
Laser Number:
2 = Double laser
3 = Triple laser
(Note 1)
Models X0X1
Models X0X0
85 – 264 VAC
20 - 30 VDC
0.4 ~ 0.2 A
1.5 ~ 1.0 A
Main (isolated)
Baud Rate
RS232
RS485 full-duplex
1200 to 115200
RS485 half-duplex
20 mA C.L.
(INT-60)
Auxiliary
RS232
Other
Lonworks network
1,25 Mb/s
(optocoupled NPN or PNP)
(optocoupled open emitter,
open collector)
Power supply:
0 = VDC
1 = VAC
Optical Resolution:
0 = Standard resolution
1 = High resolution
OPTICAL FEATURES
Light Source
Wavelength
Safety Class
Light Receiver
Laser Control
READING FEATURES
Scan Rate
USER INTERFACE
19200
LED Indicators
ENVIRONMENTAL FEATURES
Operating
Temperature
Storage
Temperature
Vibration
Resistance
Shock Resistance EN 60068-2-27 test EA
Protection Class
PHYSICAL FEATURES
Dimensions mm
(inch)
Weight
DX8200 CONTROLLER
QUICK GUIDE
Up to 3 VLDs
630 to 680 nm
Class 2-EN 60825-1;
Class II-CDRH
Avalanche photodiode
Security system to turn laser
off in case of motor slow down
500-1000 scans/s
Power ON
Encoder
Good Read
TX Data
Network (Lonworks)
0° to +50 °C (+32 to +122 °F)
-20° to +70 °C (-4° to +158 °F)
90% non condensing
EN 60068-2-6 test FC
1.5 mm @ 5 to 9.1 Hz;
0.5 G @ 9.1 to 150 Hz;
2 hours on each axis
15 G; 11 ms;
3 shocks on each axis in each
direction
IP54
576 x 513 x 150 mm
(22.7 x 20.2 x 5.9 in)
about 22 Kg (48.5 lbs.)