Cayken 850F Operating Instruction - Page 4

Browse online or download pdf Operating Instruction for Tools Cayken 850F. Cayken 850F 9 pages.

Print Page

PRODUCT MODEL AND PARAMETER

200F

400F

ITEM

Largest drill

200mm

400mm

N.W

20Kg

21Kg

Adjustable angle

0-45°

In order to continuously improve products, the company reserves the right

of the technical data and the right parts to change without prior notice.

SAFETY PRECAUTION

1、Please power off before any adjustment of the machine. unexpected start is the result

of accident.

2、Please assure the correct assembly of the drilling frame before install the machi-ne.

This is important for avoiding the collapse.

3、Please fix the machine to the firm drilling frame before starting the machine. The

movement of the machine on the stand will lead the lack of control.

4、Please put the drilling stand on stable and flight floor. It will be hard to control the

machine safely when the stand moveable or rockable .

5、Please do not overload the stand or using ladder scaffold. The overload of the stand

top will lead to the falling.

6、Please clear up the site and assure enough stable space. And pls pay attention to the

unexpected movement of any obstacle.

7、When doing deep drilling (from one side to the other), please check the other side

where the drill head will out of. pls fix and segregate this area to assure no harm to any

body or material.

8、Please be equipped with the following accessories when proceeding.

head-protection cap

ear-protection device.

goggle or dust-proof mask.

respirator / protection glove

Cloth keep you move freely.

boots with steel toe protection

First-aid box should be stand-by. pay attention to the cloth, long hair and jewelry

that could be twist into the moving part.

650F

280F

580F

650mm

220mm

480mm

750mm

24Kg

22Kg

24Kg

0-45°

If you still not clear for the operational process after checking the this manual,

Pls consult the professional person.

If you have any question about operating this machine, pls contact with your

850F

dealer.

We will always on you with all sincerity to ensure your efficiency and safety .

26Kg

0-45°

INSTALL THE STAND

There have two ways to install the stand

Using vacuum suction plate fixation

Using expansion bolts or anchor fixation

Using vacuum suction plate fixation

First install the vacuum seal on the pedestal, then connecte vacuum pump to

vacuum pressure fast connection, take the base on the desired location, start

the vacuum pump, must achieve to the minimum pressure :635 mm hg (25

inches),so that the base can seal on the surface.

Using expansion bolts or anchor fixation

Drill a hole at the position of determining by expansion bolt or anchor, tight-

en the firm base, and then check carefully whether the expansion bolt fixed

correctly, can use spanner to adjust the base screw adjust the base according

to the basement.

Warning: the vacuum suction plate can ' t used in the ceiling or wall

drilling.it may result in serious or fatal injury with negligence or imp-

roper use, if the use of vacuum suction plate, to ensure the bearing

surface is not porous, and its thick loose, make sure that the vacuum

pump have enough suction to the fixed vacuum suction plate.

Note: if you need to fixed on the wall, it is better to take out the

head for installation and fixed stand, installed on the rack after

the stand fixed, please make sure installed the head on the stand

and screw has been tightened.(if need help, with spiral crane

transferred to the appropriate length to fixed)