4IPNET WHG321 V3.30 Quick Installation Manual - Page 4

Browse online or download pdf Quick Installation Manual for Controller 4IPNET WHG321 V3.30. 4IPNET WHG321 V3.30 12 pages. Secure wlan controller

Print Page

System Overview

Front Panel

Console: The system can be configured via a serial console port. The administrator can use a terminal

emulation program such as Microsoft's Hyper Terminal to login to the configuration console interface to

change admin password or monitor system status, etc.

Reset Button: Press and hold the Reset button for over 3 seconds and status of LED on front panel will

start to blink, release button at this stage to restarting the system. Press and hold the Reset button for

more than 10 seconds and status of LED on the front panel will turn from blinking to off, release at this

stage to reset the system to default configuration.

LED Displays: There are two LED light displays.



Power: Power LED lights up when power supply is on.



Status: Status LED blinks to indicate that system OS is booting up, when lit up constantly indicates

that the system is ready for operation.

USB1 / USB2: Function reserved for future use.

WAN1 / WAN2: Two WAN port (10/100/1000 Base-T RJ-45) uplinks to the external network, such as the

ADSL Router from your ISP (Internet Service Provider).

LAN1 ~ LAN2: Client machines or switch connect to WHG321 via LAN ports (10/100/1000 Base-T

RJ-45).

Rear Panel

Power Supply Socket: Connect the power adaptor to the power socket (Input: DC+12V).

WHG321

Secure WLAN Controller

②

Quick Installation Guide

ENGLISH