Datalogic QLM500 Installation Manual - Page 14
Browse online or download pdf Installation Manual for Barcode Reader Datalogic QLM500. Datalogic QLM500 17 pages.
Print Page
QLM500 INSTALLATION MANUAL
TECHNICAL FEATURES
ELECTRICAL FEATURES
Supply Voltage
Consumption
Maximum Distributed Current Allowed
ID-NET™
Limited Current Consumption
QLM500 + reading device
Trigger + I/O device
(see related device manuals)
Inputs: Input1 (TRG), Input 2
Voltage
Current Consumption
Outputs: Output 1, Output 2
V
CE
Collector Current
V
Saturation
CE
Power Dissipation
COMMUNICATION INTERFACES
Host Interface
Auxiliary
ID-NET™
Communication Protocols
USER INTERFACE
LED Indicators:
Power/ID-NET
Trig
I/O
ETH1
ETH2
PHYSICAL FEATURES
Mechanical Dimensions
Weight
ENVIRONMENTAL FEATURES
Operating Temperature
Storage Temperature
Humidity max.
Vibration Resistance
EN 60068-2-6
Bump Resistance
EN 60068-2-29
Protection Class EN 60529
The features given are typical at a 25 C ambient temperature (if not otherwise indicated).
* when all the M12 connectors and reading device are correctly connected (or closed with a proper
protection cap).
14
10 to 30 Vdc
1.85 A max
0.75 A max
Optocoupled
30 Vdc max.
12 mA max.
Optocoupled
30 Vdc max.
40 mA continuous max.; 130 mA pulsed max.
1V max. @ 10 mA
80 mW max. @ 45 °C (ambient temperature)
EtherNet/IP 10/100 Mbit/s
RS232 up to 115.2 kbit/s
RS485 Half Duplex up to 1 Mbit/s
Datalogic Application Driver (DAD Driver)
Power On/Polarity Error (blue/red)
Trigger Activity (yellow)
IN2 (yellow), OUT1 (red), OUT2 (green),
Network Status (green/red), Link Activity (green/yellow),
Module Status (green/red), Link Activity (green/yellow)
200 x 81 x 40 mm
(7.9 x 3.2 x 1.6 in.)
500 g. (17.64 oz.)
0° to 50 C (+32° to 122 °F)
-20° to 70 C (-4° to 158 °F)
90% non condensing
14 mm @ 2 to 10 Hz; 1.5 mm @ 13 to 55 Hz;
2 g @ 70 to 200 Hz; 2 hours on each axis
30 g; 6 ms;
5000 shocks on each axis
0.3 - 0.2 A
4.0 A max
IP65 *