CB Tech CB-VOC User Manual - Page 9

Browse online or download pdf User Manual for Water System CB Tech CB-VOC. CB Tech CB-VOC 20 pages. Drinking water system

Print Page
6.
Lift the top half of the CB-VOC off of the
bottom half. Make sure that the black
O-ring remains in place on the bottom half
of the housing.
7.
Remove the old filter cartridge from the top
half of the housing by rotating it counter-
clockwise (if facing the inside of the top
half of the housing).
8.
Dispose of the used filter cartridge in your
waste container.
9.
Rinse out the inside of the system housing, hand washing if necessary.
10.
Inspect the black rubber cushion on the inside of the top half of the
housing, making sure that it is not cracked or worn; CB Tech recommends
that the cushion be replaced every two to three years.

Installing the New Filter Cartridge

1.
If you have not done so already, remove the plastic wrapper and
instruction wrap from around the new filter cartridge.
2.
Align the threaded hole of the new filter
cartridge onto the inside thread of the top
half of the CB-VOC. Rotate the cartridge
clockwise to tighten (if facing the inside
of the top half of the housing). Make sure
that the cartridge is threaded properly
and straight. DO NOT OVERTIGHTEN.
3.
Reconnect the top half of the housing
(with attached filter cartridge) with
the bottom half. Replace the Locking
V-Band, making sure the screw is in place
to connect the band together.
4.
Screw the black knob onto the Locking
V-Band, turning it clockwise to tighten.
5.
Make sure that the V-Band is tightly secured evenly around the housing
top and bottom.
6.
To resume normal use of the CB-VOC, proceed to section
System for Use (Pg 5).
7
turn to
remove
turn to
connect
Prepare Your