Datalogic LD46 Instructions - Page 2

Browse online or download pdf Instructions for Accessories Datalogic LD46. Datalogic LD46 4 pages. Luminescence sensors

Print Page
TECHNICAL DATA
Power supply
Ripple
Consumption (output current excluded)
Light emission
Setting
Indicators
Output
Output current
Saturation voltage
Response time
Switching frequency
Connection
Dielectric strength
Insulating resistance
Electrical protection
Mechanical protection
Ambient light rejection
Vibrations
Shock resistance
Minimum spot dimension
Housing material
Lens material
Operating temperature
Storage temperature
Weight
DIMENSIONS
735
LD46-UL-755
NS)
(22mm LENS)
28
31.5
TECHNICAL DATA
15...30 Vdc limits value
2 Vpp max.
50mA max @ 24Vcc
d):
1 PNP output
1 NPN output
DIMENSIONS
LD46-UL-715
(9mm LENS)
4.8
8.5
N°2 M5 depth 6mm
3.5mm passing holes
KEYLOCK function (patent-covered)
The KEYLOCK function deactivates the keyboard thus avoiding accidental
changes in the sensor setting.
At sensor powering the keyboard is blocked (KEYLOCK LED OFF). To
activate it, press
ON.
The keyboard is automatically blocked if not used for 2 minutes.
Unblock the keyboard to proceed with sensor adjustment.
15 ... 30 Vdc (limit values)
2 Vpp max.
50 mA max. at 24 Vdc
UV LED 375 nm
SET push-buttons
yellow OUTPUT LED
green READY LED
orange DELAY LED and KEYLOCK LED
5-segment bargraph
PNP/NPN; analog output
100 mA max.
M12 5-pole connector
500 Vac, 1 min between electronics and housing
>20 MΩ, 500 Vdc between electronics and housing
class 2, double insulation
according to EN 60947-5-2
0,5 mm amplitude, 10 ... 55 Hz frequency, for every axis (EN60068-2-6)
11 ms (30 G) 6 shock for every axis (EN60068-2-27)
2 x 8 mm at 10 mm (mod. LD46-UL-715)
3x11 mm at 24 mm (mod. LD46-UL-755)
4x15 mm at 50 mm (mod. LD46-UL-735)
aluminium
-10 ... 55 °C
-20 ... 70 °C
180 g max.
60.7
44.7
24
40
M12x1
5
mm
SETTING
for 5 seconds until the KEYLOCK LED (orange) turns
2 V max.
250 µs
2 kHz
IP67
glass
DELAY SETTING
The DELAY extends the minimum ac
allowing even slower interface systems
The delay is signalled by the correspond
OUT without DELAY
31.9
OUT with DELAY
Delay activation
- Press
Delay deactivation
- Press
OFF.
OUTPUT OVERLOAD
The digital output overload is signalled
21
LED.
ANALOGUE OUTPUT
The analogue output supplies a voltage
the sensor. The voltage supplied is 0.75
CATALOG | Photoelectric Sensors
ON
OFF
ON
20ms
OFF
for 2 sec until DELAY LED t
for 2 sec until DELAY L
DETECTION
155