4Kam Air HDs Pro HD Manual - Page 5

Browse online or download pdf Manual for Security Camera 4Kam Air HDs Pro HD. 4Kam Air HDs Pro HD 5 pages.

Time Setting

1.Connect the device with PC, you need to create a file named settime.txt under the SD memory card

2. Open the new Text document, input the local true time according to the following set form. For example: The present

Beijing time is: 06:09:01,8th,Jul,2015,So we input like this:2015 07 08 06 09 01(space needed between each number)

after finished save the file and exit.

3.Press "Power On" then the camera start recording, when connect with PC, the time shown on the video should be correct.

Charge the camera

Recharge the battery via USB Cable

1.Turn the camera off, then plug the camera with the rechargeable battery to a computer with the USB cable provided

2.The blue LED will light up to show the battery is charging.

3.The blue LED will be turned off when the battery is fully charged.

The rechargeable battery can working nearly 90-100 Minutes under the 1080P@30FPS or 720p@60fps, it will take 2

hours when fully charged.

NOTE

- Ensure the SD card is inserted correctly

- Do not touch the connect terminals on the back of the microSD card

- The card may be damaged if it is not fully inserted

- The card and the data may be damaged if the microSD card is inserted or removed while the camera is on

- The camera supports microSD/SDHC Class 4 cards or above and compatible up to 32GB MicroSD cards with lower

classes may cause performance drop during recording.

Connecting to a Computer

You can upload your recorded video footage and photos on a computer when enabled the computer and camera.

1.Turn the camera on.

2.Connect your camera to a computer using the USB cable.

3.It will show the removable disk when connected successfully.

4.Using the computer software to process the video and photo.

Camera Precautions

Please read below instructions when you use this camera

- Do not leave the camera in places exposed to extremely high temperatures , such as direct sunlight for extended periods

of time. This may affect the camera housing and internal components.

- Please clean the lens with a soft cloth to remove fingerprints or dust.

- If the rechargeable battery is mishandled, it can burst, cause a fire or even chemical burns. Please note the following:

Do not disassemble.

Do not crush and expose the rechargeable battery to any shock or force such as hammering, dropping or stepping on it.

- Before remove the SD card, please turn off the camera at first, or it may cause damage of the files or SD card.

- Remove the SD card before storing the camera for long periods of time. Keep it in a well-ventilated place.