Datalogic S70-5-E1-N Manual - Page 2
Browse online or download pdf Manual for Accessories Datalogic S70-5-E1-N. Datalogic S70-5-E1-N 18 pages. Advanced sensor with dual digital displays for use with plastic and glass fiber optic assemblies
Print Page
MOUNTING INSTRUCTIONS
Mount on a DIN Rail
1. Hook the DIN rail clip on the bottom of the S70 over the edge of
the DIN rail (1).
2. Push the S70 up on the DIN rail (1).
3. Pivot the S70 onto the DIN rail, pressing until it snaps into
place (2).
Remove from a DIN rail
1. Push the S70 up on the DIN rail (1).
2. Pivot the S70 away from the DIN rail and remove it (2).
INSTALLING THE FIBERS
Follow these steps to install glass or plastic fibers.
1. Open the dust cover.
2. Move the fiber clamp forward to unlock it.
3. Insert the fiber(s) into the fiber port(s) until they stop.
4. Move the fiber clamp backward to lock the fiber(s).
5. Close the dust cover.
Fiber Adapters
NOTE: If a thin fiber with less than 2.2 mm outer diameter is used, install the fiber adapter provided with the fiber assembly to
ensure a reliable fit in the fiber holder. Datalogic includes the adapters with all fiber assemblies.
Fiber Outer Diameter (mm)
Ø 1.0
Ø 1.3
Ø 2.2
When connecting coaxial-type fiber assemblies to the amplifier, install the solid core fiber to the LED emitting port, and the multi-core
fiber to the PD receiving port for most reliable detection.
Single-core fiber
Adapter Color
Black
Red
No adapter needed
RECEIVER
Multi-core fiber
EMITTER
TO
FIBERS
2
Move forward to release the fibers
Fiber Clamp
Fiber Receiver Port
Fiber Emitter Port
TO
SENSOR