CBC EN7-S02T Quick Start Manual - Page 8

Browse online or download pdf Quick Start Manual for Thermal cameras CBC EN7-S02T. CBC EN7-S02T 11 pages.

Print Page

Device Configuration

After logging into the platform, check "Device -

and select the area as "Area 1". You also configure other parameters,

like network, identification parameters of the device as well as gallery

view, device deletion. etc.

Temperature measurement setting:

On the device list interface, click "

"Temperature Check", Setting "Alarm Temperature", and click "Set" to

complete the setup.

Note: "Temperature Check" is enabled by factory default as "37.3 ℃".

- Basic Parameters",

-Function Parameters", enable