Datalogic Memor X3 Quick Start Manual - Page 2

Browse online or download pdf Quick Start Manual for Docking Station Datalogic Memor X3. Datalogic Memor X3 2 pages. Single ethernet dock
Also for Datalogic Memor X3: Quick Start Manual (2 pages), Instructions (2 pages), Troubleshooting Manual (10 pages), Quick Start Manual (2 pages)

Print Page

INSTALLING A MICROSD CARD

Turn off the Memor X3.

Push the latch release button and pull the latch down (see

section GETTING STARTED); then remove the cover and

the battery pack:

Open the microSD card slot by lifting up the locking plate:

Shift the cardholder upwards and then pull it up:

Insert the microSD card with the written part upward:

Lock the card into place by pushing the cardholder down

and then shifting it downwards; push the locking plate

down:

Reinsert the battery cover (see section GETTING

STARTED).

SCANNING AND IMAGING

Laser Data Capture

2D Imager Data Capture

Linear barcode

2D Matrix symbol

ÌBX3ÉÎ

Relative Size and Location of Aiming System Pattern

Linear Imager Data Capture

Scanning with a Memor X3 Linear Imager

When beams reflect directly back into the scanner from the bar code,

they can "blind" the scanner and make decoding difficult.

To avoid this, don't keep the terminal perpendicular to the barcode:

moving it of a small angle of ±2° is usually enough to enable proper

reading. But don't scan at too oblique an angle either: keep the scanner

within an angle of ±30° from the perpendicular to the barcode in order to

guarantee effective scanning.

Side Views

Specular reflection.

Light

Reflected beam

Source

is within specular

dead zone and

prevents decode.

Tilt Bar Code At Slight Angle (Up to 30°)

REFERENCE DOCUMENTATION

For further information regarding Memor X3 refer to the SDK Help on-

line and to the Memor X3 User's Manual.

For information regarding safety and regulatory refer to the Safety and

Regulatory Addendum or to the dedicated section of the Memor X3

User's Manual.

SERVICE AND SUPPORT

Datalogic provides several services as well as technical support

through its website.

Please check our website at

www.datalogic.com

Services", then "Automatic Data Capture", and click on the links

indicated for further information including:

Downloads

Manuals for the latest versions of user manuals and product

guides.

Software & Utilities for the latest firmware release for your

product. You can also click on the following link for direct

access

www.datalogic.com/products_updates.

Service Program for warranty extensions and maintenance

agreements.

Repair Centers for a list of authorised repair centers.

Technical Support Automatic Data Capture email form to

contact our technical support

WARRANTY TERMS AND CONDITIONS

The warranty period is 1 year for the device and 90 days for

consumables (e.g. battery, power supply, cable etc.) from date of

purchase at our company.

No specular

reflection.

Decode can

occur.

Protected to the fullest extent under U.S. and international laws. •

Copying, or altering of this document is prohibited without express

written consent from Datalogic ADC S.r.l.

Datalogic and the Datalogic logo are registered trademarks of

Datalogic S.p.A. in many countries, including the U.S.A. and the E.U.

Memor and the Memor logo are trademarks of Datalogic ADC S.r.l.

All other brand and product names mentioned herein are for

identification purposes only and may be trademarks or registered

trademarks of their respective owners.

under "Support &

this

section: