ADE KE 1301 Instruction Manual - Page 4

Browse online or download pdf Instruction Manual for Scales ADE KE 1301. ADE KE 1301 14 pages. Modelo lola

Print Page

Thank you for purchasing a high-quality ADE product. Your new scales feature tried-and-

tested quality and meet the highest technical standards.

Please read these Operating Instructions carefully before using the product for the first

time, and keep them in a safe place so that you can consult them again if you need

further information.

First use

Inserting the batteries:

Open the lid of the battery compartment on the underside of the scales and insert the

batteries supplied (4 x 1.5V AA). Please ensure the correct polarity of the batteries (+/-).

Safety guideline s:

Ensure that no objects fall onto the scales; otherwise, the scales

may be damaged.

Use only a damp cloth to clean the scales. Never use solvents or

abrasive cleaning agents. Do not immerse in water. If the scale's

plastic parts come into contact with grease, spices, vinegar or

any other strongly spiced or coloured foods, please ensure you

clean them immediately. Keep citric acid away from the scales.

2. Operation

Switch ing on the scales:

Place the scales on a firm, level surface. Press down on the scales' surface for about

2 seconds with a pressure of 500 g to switch the scales on. The backlighting lights up,

the display shows initially "HI", and once stabilised, will switch to "0 g" or "0: 00 lb oz"

depending on setting. The scales are now ready for use.

Note: If a weight is shown in the display after activation, touch the TARE button to reset

the scales to zero.

Units of weight:

Switch on the scales by touching the TARE button to change the unit of weight

(g <> lb:oz). Touch the TARE button again, when "HI" is displayed. The unit of weight will

now be toggled. Please ensure that the scales are configured to show the unit of weight

that you normally use.

Tare weight function:

Touching the TARE button will set the scales to "0 g". Place e.g. a bowl on the scales,

and touch the TARE button to set the scales back to "0 g". You can repeat this

procedure as often as you like until you reach the scales' max. load capacity (3 kg) is

reached. Once you remove your weighed item(s), the total weight is shown as a minus

value.

Automatic deactivation:

The backlighting of the scales switches off automatically if no weight change is registered

for about 10 seconds. The scales will switch off automatically if no weight change is

registered for about 1 minutes.

3. Error messages

"Lo"

Battery is empty – Please replace the batteries with the appropriate

battery type (4 x 1.5V AA).

"O-Ld" =

Overload – The 3 kg maximum load capacity has been exceeded.

Remove the object from the scales immediately to avoid damaging the

scales' load cell unit.

4. Technical data

Load capacity x gradation:

Max. 3 kg x 1 g

Dimensions:

195 mm x 195 mm x 26 mm

Batteries:

4 x 1.5V AA (included)

Subject to technical changes as a result of product improvements.

5. Warranty

ADE agrees to rectify any material or manufacturing defects by offering free repair or

replacement, for a period of 3 years from the purchase date. At the time of purchase,

please get the retailer to fill in and stamp the guarantee card. In the case of guarantee

claims, please return the scales to your retailer including the guarantee card and stating

the reasons for the claim.

CE conformity

This device is interference-supp ressed in accordan ce with the

applicable EU Direc tive 2004/108/EC

Note: Extreme sources of electromagnetic radiation, such as those caused by the

operation of radio equipment in the vicinity of the scales, can affect the value displayed.

Once the interference has been eliminated, the product will once again function normally.

Note: the unit may need to be reset.