Datapath Aligo TX100 Quick Start Manual - Page 8

Browse online or download pdf Quick Start Manual for Receiver Datapath Aligo TX100. Datapath Aligo TX100 12 pages.

Print Page

Aligo Quick Start Guide

LED'S

The green power LED indicates that the device is connected to a power supply and is

Power

switched on. Amber power LED means power is available, but board is switched off

(RX100 only).

Off - The device is still powering up.

Flashing on/off - Indicates the device has booted correctly (occurs approximately

30 seconds after power on) but it is not currently registered with the active

Link

Aetria Network Manager server.

Solid on - Indicates that the device has booted and the device is currently registered

by the active Aetria Network Manager server.

Flashing on/off - Indicates that no stable video has been received/transmitted since

last power on.

Off - Indicates that no stable video is currently being received/transmitted, but video has

Video

previously been received/transmitted on one or more channels since the last power on.

Solid on - Indicates that a stable video source on one or more channels has been locked

onto by the device and transmitted out onto the network (TX) / received from the network

and output to HDMI sink (RX).

The Aligo QTX100 and Aligo RX100 have LEDs on the 10G ports to indicate that each

10G Ports

network channel has good stable power.