Dataplot EMBLEM EASY Airpress standard Operating Manual - Page 11

Browse online or download pdf Operating Manual for Power Tool Dataplot EMBLEM EASY Airpress standard. Dataplot EMBLEM EASY Airpress standard 20 pages. Pneumatic eyepress

Print Page
(E)
5
) Loosen the set screw "b" of the top die "D".
th
(D)
6
) Open the air inlet valve "F", so the compressed air enters the cylinder
th
and the main shaft comes up releasing the dies (Fig. 17 and 18). Take
the dies out and shut the air inlet valve "F" for safety reasons.
(F)
7
) Out of the machine, take the new set of dies and gently enter the puncher of the
th
top die "D" into the center hole of the cutting or bottom die "E" (see Fig. 16).
8
) Place the new set of dies on the bottom shaft at the setting area with
th
the set screws looking to the right hand side of the machine.
9
) Under the stainless steel plate tighten the set screw "a" (see Fig.
th
Fig. 17
(D)
Fig. 15
Fig. 16
Fig. 18
Fig. 19
(a)
(b)
(E)
Page - 11 -