Dataprobe IP-810 - Manual - Page 9

Browse online or download pdf Manual for Switch Dataprobe IP-810 -. Dataprobe IP-810 - 17 pages. Web controlled power switches

Print Page

iPAL

3) Setting Parameters using Telnet

Additional configuration parameters need to be set using Telnet. To connect to the iPAL using telnet, run your telnet client

program (provided with your operating system) and connect to the IP address as set in step one above.

For Windows:

Select Run...Telnet

Connect...192.168.1.254 (or the IP address you set as above)

Please Note: The iPAL system used as the controller for this product has many features and

capabilities outside of its use as a power switch. Many of the setup fields are not applicable

to this product and should not be changed. They are included here only for reference and to

allow for re-set to factory defaults, should they become inadvertently changed.

The iPAL system is capable of controlling up to eight outlets. Model's iP-410 and iP-415 provide only four outlets, with room

for expansion to eight with an additional unit. Models iP810 and iP-815 control all eight outlets.

All setup parameters that should be changed are marked

All setup parameters that should not be changed are marked

Menu System

As soon as you connect the following message will be displayed:

iPal

Version 2.10

Please Enter The Password >

The factory default password is:

This password is case sensitive and can be changed in the setup process. The iPAL has a security timeout feature. After 2

minutes of no activity, iPAL will automatically terminate the session. Should this occur, simply re-connect and re-enter the

password.

* For All Models *

* Std. Default = *

PASS

Page 9