Dataprobe COE-8 Hardware Installation - Page 6

Browse online or download pdf Hardware Installation for Network Hardware Dataprobe COE-8. Dataprobe COE-8 7 pages. Contact closure over ethernet

Print Page

COE-8

SNMP

The COE-8 can be monitored and configured via SNMP managers. Download the MIB at

http://dataprobe.com/files/mibs/coe8.mib

Enter the IP addresses of up to 4 SNMP managers. Enable or Disable SNMP with the checkbox

provided. Traps can be sent every time there is a change of state on any COE-8 channel. Check the

box provided to enable this. If both the COE-8I and COE-8O are configured to send traps, two

messages will be received by each SNMP manager for each event.

Passwords

Two username and password sets allow for two types of users:

User Type

Administrator

General User

Click Apply to save the new usernames and passwords.

Default Username / Password

admin / admin

user / user

Access

Full view and setup

View status only

Page 6