Dux Endurance Six 26XL Installer's Manual - Page 6

Browse online or download pdf Installer's Manual for Water Heater Dux Endurance Six 26XL. Dux Endurance Six 26XL 14 pages. Gas continuous flow water heater

Print Page

Step 8

• This unit has a preset temperature of

50°C.

• If controllers are installed, the

maximum temperature setting will

still be 50°C.

Step 9

• Make sure there is water inside the

unit prior to turning on the power.

This can be achieved by turning on

the tap.

Step 10

• If the water heater has been installed

correctly, when the power is turned

on the heater will go through

initialisation. This will take a few

seconds.

• If a fault occurs, please refer to the

Owner's Manual.

• The gas valve must be checked for

gas pressure during operation.

• The test point pressure should be

set in accordance with the pressure

rating marked on the data plate label,

located on the side of the heater.

• Commission appliance and check

safe and correct operation of the

appliance.

Installer's Guide – Endurance six™

Part No: IG090701

Version: B