Duxbury Networking DUX2524P Installation Manual - Page 2
Browse online or download pdf Installation Manual for Switch Duxbury Networking DUX2524P. Duxbury Networking DUX2524P 4 pages. 24-port gigabit layer 2 managed ai poe switch
Print PageINTRODUCTION
DUX2524P is a Layer 2 Managed AI PoE switch designed for security
transmission and WiFi coverage. It can satisfy the POE power supply requirements
of Access Points, IP cameras, WiFi bridges, IP phones and other types PoE
equipment. The product adopts a new generation of high-performance hardware
and software platform to provide flexible, cost-effective access and Gigabit uplink
ports. The switch supports complete security protection mechanism, ACL/QoS policy
and rich VLAN functions. It is easy to manage and maintain while satisfying users
requirements for network equipment. The DUX2524P is designed for network access,
aggregation, and core application scenarios of campus, hotel and enterprise campus.
KEY FEATURES
Support 4 working modes, AI VLAN,
AI Extend, AI PoE and AI QoS
AI Extend: support 250Meters
long-distance power supply (recommended
Cat5e or 6 network cable)
AI VLAN: Seperating ports 1-24 from
each other can effectively suppress
network storms and improve network
performance.
PRODUCT INTRODUCTION
24 1000Mbps RJ45 ports (support
PoE power supply)
2 Gigabit SFP ports,1 console port
Supports 5 working modes: standard
switching, AI VLAN, AI Extend ,AI
PoE,AI QoS mode.
Total power:250W
Web Login
Step1: In the normal operation of the device, connect the computer to the
switch's RJ45 port by network cable
Step 2: Manually changed the computer IP address to 192.168.254.X
(X is 2 ~ 254), subnet mask is 255.255.255.0
Step3: Open computer's browser, type 192.168.254.1 in the address box, hit
the Enter key
Step4: Enter the default username and password "admin" and then click Login
Step5: For detailed information please refer to the DUX150P User Manual
AI QoS: Prioritize identified video
data to make video transmission
smoother
AI POE: Automatically detect the
power receiving port, find the dead
device, power off and restart the
Support port management, PoE
management, link aggregation,
spanning tree,loop protection,multi-
cast,and attack defense
Support HI PoE,IEEE802.3af/at,Max-
.46W output power single port
SHORTCUT BUTTON
DIP switch function
AI QOS: Improve video data processing capabilities and improve the monitoring of Caton and Mosaic
phenomena in the network.
EXTEND: 1-8 port rate down to 10Mbps, but the transmission distance up to 250 meters.
VLAN: Isolating ports 1-24 from each other, suppress network storms e ectively and improve
network performance.
AI Power Supply: Detect PD, power failure and restart dead equipment.
RST Button
When the switch is powered on, press the button with needle and release the device to enter the
restart state. When the SYS light is turned on again, the device restarts. When the switch is powered on,
press the button for 5 seconds or more to release the button device to enter the reset status, when SYS
lights up again, the device resets successfully.
Console Port
The Console port is used for connecting to the serial port of a computer or other terminal to manage or
con gure the switch.
Installation Suggestion:
1. Connect all your networking equipment (including any PoE devices) to the switch.
2. Connect power to your switch and wait a moment for it to power on.
3. Check the status of your switch.
4. Use the switch in a clean, cool and dry environment.
5. Remove the power cable before any new devices are connected to the switch.
6. Only use CAT 5 or above to ensure maximum distance of up to 100m