AGRI-COVER ACI SRT-2 Installation Instructions Manual - Page 3

Browse online or download pdf Installation Instructions Manual for Tractor Accessories AGRI-COVER ACI SRT-2. AGRI-COVER ACI SRT-2 8 pages.
Also for AGRI-COVER ACI SRT-2: Installation Instructions Manual (8 pages)

Print Page

SAFETY INFORMATION

DANGER: Mounting replacement tarp to a structurally weak or damaged roll

tube can result in serious injury or death.

Before installing replacement tarp, inspect mounting surface of roll tube. Be aware

several mounting holes in close proximity may compromise roll tube strength and

integrity. Ensure mounting location on roll tube provides adequate tarp support.

• Disconnect power before servicing system or electrical components.

• Always use caution when operating tarp.

• Ensure people and objects are clear of tarp system before and during operation.

• Instruct everyone who will operate this tarp on the proper procedures.

• Never allow children to operate or play with system.

• Do not operate tarp with box hoisted in elevated position.

• Ensure tarp system is fully open or fully closed before operating vehicle at highway

speeds.

• Only operate system when tarp is completely visible.

• Always refer to OEM instructions before installing electrical components.

• Do not use arm as a step.

• Remove snow or debris from top of tarp before operating.

• End caps must be free from commodity. Commodity should not be piled higher than

end caps.

• Do not directly spray motor or connections with a pressure washer.

• Ensure tarp is fully open before unloading or loading.

NOTE: Safety and operating procedure decals provided with this kit should be kept

clean at all times and replaced if worn, damaged, painted over or unreadable.