CONVIV'HOME TCA-150EX Instruction Manual - Page 13
Browse online or download pdf Instruction Manual for Coffee Maker CONVIV'HOME TCA-150EX. CONVIV'HOME TCA-150EX 18 pages. Electric espresso coffee machine
Print Page
With this function, you can directly make hot water eg for hot tea.
Also clean the cups, pre-heat your coffee cup. ( to ensure that the temperature of
the coffee will not decrease.)
Method:
1. Pour water into water tank.
Note: the water level should not exceed the "MAX" mark in the tank.
2. Replace the tank properly in the unit.
Make sure the Steam control knob (on A), the Steam button (5) and the
Coffee/Hot water (3) are on the "OFF" or "0" position.
3. Connect to power source,
4. Turn the ON/OFF button to the "1" position. The red pilot light will light up.
5. Wait for the Green pilot light turning on.
6. When the green light is on,
12. Turn the Steam control knob in anti-clockwise position (B). Rotate, at least,
135°.
13. Turn the Coffee/Hot water selector (3) to the "1" position. The pump will
pump and hot water will flow out from the steam nozzle.
Notes: If the Green pilot light turns off, Press the Coffee/Hot water selector to the
"0" position and wait for the green lamp lights again.
At first the hot water will scatter from the steam tube. May let the steam
wand outlet close to the coffee cup wall. From this moment, pay attention to the
projection of hot water. Splash may burns skin.
When jug is filled in:
14. Turn the Steam control knob in clockwise position on the "0" position (A).
15. Press the ON/OFF switch to the "0" position to cut the power source off.
Note: The red and green lights turn off and the coffee machine stops working.
The steam tube (without the frothing device) can be used to make hot
beverages like drinking chocolate, Hot water or Hot tea.
Method:
1. Pour water into water tank.
Note: the water level should not exceed the "MAX" mark in the tank.
2. Replace the tank properly in the unit.
Make sure the Steam control knob (on A), the Steam button (5) and the
Coffee/Hot water (3) are on the "OFF" or "0" position.
3. Connect to power source,
4. Turn the ON/OFF button to the "1" position. The red pilot light will light up.
5. Turn the Coffee/Hot water selector to the "1" position. The pump will pump,
when water will flow out, Close the pump by putting Coffee/Hot water
TO MAKE HOT WATER
PRODUCING STEAM TO HEAT LIQUIDS
13