Datasensor OF-42UF-20 Instruction Manual - Page 3
Browse online or download pdf Instruction Manual for Cables and connectors Datasensor OF-42UF-20. Datasensor OF-42UF-20 3 pages.
OF50
INSTRUCTION MANUAL
The OF50 fibre-optic is an accessory for the
LDµ luminescence detector series.
INSTALLATION
To install the OF50 proceed as follows:
• Disconnect the power supply of the
sensor.
• Replace the sensor lens with the fibre
adapter.
• Insert the fibre-optic into the adapter; the
first insertion resistance is due to the O-
ring seal; please continue to insert the
fibre until it reaches the mechanical
stop.
• Fix the fibre-optic to the adapter using
the setscrew wrench included in the
package.
The fibre is made of a liquid solution
enclosed in a plastic covering; for a correct
functioning of the fibre the bend radius must
be greater than 60mm; don't twist or stretch
the fibre.
3
2
1
4
63
TECHNICAL DATA
Operating and storage temperature:
Covering material:
Tip material:
Adapter material:
Bend radius:
Protection class:
Weight:
WARRANTY
DATASENSOR S.p.A. warrants its products to be free from defects.
DATASENSOR S.p.A. will repair or replace, free of charge, any product found to be defective during the warranty period of 36 months from the manufacturing date.
This warranty does not cover damage or liability deriving from the improper application of DATASENSOR products.
DATASENSOR S.p.A. cares for the environment: 100% recycled paper.
DATASENSOR S.p.A. reserves the right to make modifications and improvements without prior notification.
DIMENSIONS
Bend radius
4
520
5
mm inch
-5 ... +60°C
15
Plastic
7.5
Brass Chrome plated
spot
Aluminium anodized
7.5
Minimum 60mm
IP64
15
100 g.
DATASENSOR S.p.A. Via Lavino 265
40050 Monte S. Pietro - Bologna - Italy
Tel: +39 051 6765611
Fax: +39 051 6759324
http://www.datasensor.com
e-mail: [email protected]
826000502 Rev.B
1
44
2
3
20
4
5
mm
READING DIAGRAM
LDµ SERIES WITH OPTIC FIBRE OF50
0.5
0.5
1
0
10
20
0.5
TARGET 1
TARGET 2
TARGET 3
Lens
Adapter
Setscrew
O-ring
Fibre-optic
LENGTH = 0.5 m
inch
distance
40
30
mm