DV8 SRBR-04 Installation Manual - Page 3
Browse online or download pdf Installation Manual for Automobile Accessories DV8 SRBR-04. DV8 SRBR-04 4 pages. Sliders for 2021+ (2-door) ford bronco
Print Page
INSTALLATION
MANUAL
STEP
4
Remove the two outside nuts on
the rear body mount using a 15mm
socket.
STEP
5
With additional help, hold the slider
up to the body mounts so that slider
is positioned over the studs. (Large
mount on slider will be used on
the rear mount) Using the factory
hardware tighten the nuts to 50ft lbs.
Repeat steps for the other side of the
vehicle.
Note: Assistance is recommended to
prevent injury or damage to the product
and vehicle.
You will need to use at minimum a 10"
extension to reach to the nuts on the rear
mount.
855-680-9595
NEED HELP?