DV8 OFFROAD MTO Series Installation Manual - Page 9
Browse online or download pdf Installation Manual for Automobile Accessories DV8 OFFROAD MTO Series. DV8 OFFROAD MTO Series 13 pages. 2021 ford f-150 front bumper winch & non winch
Print Page
INSTALLATION
MANUAL
STEP
18
Install the factory wire harness into
the bumper with the main plug lying
at the passenger side of the bumper.
Loosely lay the sensors over the
correlating holes. Different levels
of factory trims will offer different
amounts of sensors on the front
bumper. Utilize the holes on the
bumper that closely relate to the
factory bumper. Any remaining holes
will utilize the provided sensor plugs.
STEP
19
Once the sensors are in place, loosely
secure the wire into place with zip
ties (not provided) using the welded
in zip tie tabs.
STEP
20
Our bumper sensor holes are keyed to
fit each sensor bezel into the correct
spot on the bumper. To install your
factory sensor bezels into the DV8
bumper, look for the letters marked
on each bezel. For example, this bezel
is marked "FIL" meaning "front inner
left".
855-680-9595
NEED HELP?