Agri-Fab 45-0187 Owner's Manual - Page 6
Browse online or download pdf Owner's Manual for Spreader Agri-Fab 45-0187. Agri-Fab 45-0187 12 pages. Agri-fab broadcast spreader 160 owners manual
Also for Agri-Fab 45-0187: Owner's Manual (12 pages)
Print Page
15. Assemble the flow control arm to the flow control
mounting bracket using one 1/4" x 5/8" hex bolt
and one 1/4" hex lock nut. See figure 10. DO NOT
OVER TIGHTEN FLOW CONTROL ARM MUST
PIVOT FREELY.
16. Hook one end of extension spring through small
hole near bend in flow control rod and the other
end through the hole in flow control mounting
bracket. See figure 10.
FLOW CONTROL ARM
FLOW CONTROL
MOUNTING
BRACKET
FLOW
CONTROL
ROD
EXTENSION
SPRING
1/4" LOCK NUT
FIGURE 10
17. Place 1/4" flat washer on end of flow control link,
align with slot in flow control mounting bracket
and insert end of flow control rod through slot and
hole in flow control link. Secure with 3/32" cotter
pin. See figure 11.
FLOW CONTROL
ROD
1/4" FLAT
WASHER
FIGURE 11
FLOW
CONTROL
LINK
1/4" x 5/8"
HEX BOLT
FLOW CONTROL
MOUNTING BRACKET
3/32" COTTER
PIN
FLOW CONTROL LINK
18. Hook free end of flow control rod through hole in
slide gate bracket located near bottom of hopper.
See figure 12.
HOPPER
FIGURE 12
19. Assemble flow control mounting bracket to the
hitch tube using two 1/4" x 1-3/4" hex bolts, two 1/
4" flat washers and two 1/4" hex lock nuts. See
figure 13. DO NOT TIGHTEN AT THIS TIME.
1/4" x 3/4"
HEX BOLTS
1/4" FLAT
WASHERS
FIGURE 13
SLIDE
GATE
BRACKET
FLOW
CONTROL
ROD
FLOW CONTROL
MOUNTING BRACKET
1/4" HEX
LOCK NUTS