DVB CCGX-01 Installation Manual - Page 13

Browse online or download pdf Installation Manual for Automobile Accessories DVB CCGX-01. DVB CCGX-01 13 pages. Molle center console and bridge 03-09 lexus gx470

Print Page

INSTALLATION

MANUAL

STEP 17 |

To use the nutsert tool,

slider the M6 washer and spacer onto

the provided M6x50 bolt with the washer

going on the bolt first.

Then install a nutsert onto the exposed

threads by hand.

STEP 18 |

Slide the nutsert tool with

the nutsert into the mounting hole.

Ensure the flange of the nutsert is flat

against the vehicle prior to tightening.

STEP 19 |

Use a 12mm wrench to

hold the spacer while tightening with

a 10mm socket. Tighten slowly until

the nutsert is set properly. Do not over

tighten.

Nutsert should be "crushed" against the

inside of the trim so that it is tight and

secure. When finished remove the nutsert

tool using a 10mm socket and repeat as

needed.

Note: Be sure to hold the spacer tight so it does

not move and scratch paint.

NEED HELP?

855-680-9595