DVC 5630-006 Installation, Operation & Maintenance Manual - Page 6

Browse online or download pdf Installation, Operation & Maintenance Manual for Controller DVC 5630-006. DVC 5630-006 16 pages.

Print Page

4.2.1 Actuator mounting base details

Actuator Mounting Base: F03/F05 and F07

DANGER:

HAZARDOUS VOLTAGE. Make sure all incoming power is disconnected before performing the mounting.

4.3 Limit switch setting

Manually rotate the hand wheel of the actuator to fully closed position

Using a hex wrench, loosen the set screw in the CLOSE limit switch cam

Rotate the CLOSE cam towards limit switch lever until the switch 'clicks' (see Figure 1 below)

Tighten the set screw with the hex wrench

Manually rotate the hand wheel of the actuator to opened position

Using the hex wrench, loosen the set screw in the OPEN limit switch cam

Rotate the OPEN cam towards limit switch lever until the switch 'clicks' (see Figure 2 below)

Tighten the set screw with the hex wrench

DANGER:

HAZARDOUS VOLTAGE. Make sure all incoming power is disconnected before setting the limit switch.

FIGURE 1: CLOSE CAM SETTING

FIGURE 2: OPEN CAM SETTING

Know-how makes the difference

F03, F05, F07

Close Limit Switch

Close Limit Switch Cam

(Clock Wise)

2mm Hexagon

Socket Screw Key

Open Limit Switch

Open Limit Switch Cam

(Counter Clock Wise)

Square Adapter

14mm - 11mm

11mm - 9mm

Star Adapter

14mm - 11mm

11mm - 9mm