ADE M403020 Operating Manual - Page 3
Browse online or download pdf Operating Manual for Scales ADE M403020. ADE M403020 16 pages. Class iii approved scales electronic chair scales
This symbol means: "Consult operating instructions". To achieve accurate results, read the
instructions for use carefully before use and follow all instructions provided therein. Keep the
instructions for use for future reference.
Your ADE electronic chair-scale is a quality, sturdy and durable product manufactured under the high stand-
ards and regulations for calibrated class III scales in accordance with national regulation in Germany. The
scale
is designed and manufactured for the daily practice in hospitals, doctors' surgeries and in-patient nursing
facilities.
ADE instruction manuals have been prepared to provide the user with all the necessary knowledge about the
safe use of ADE scales and their related accessory equipment.
For further questions about how to use the products or about this or other service manuals, feel free to contact
your local ADE representative or visit our web page at www.ade-hamburg.de
In order to achieve the best possible results kindly read and follow the operation manual in all respects.
The ADE chair scale is already been delivered in a fully assembled condition. Please insure that your scale is
being placed vibration free at a dry place.
Alignment of the scale
1) Place the chair scale on a plain, dry and level surface before the weighing of patients.
3) The air bubble in the spirit level should be right in the centre of the circle
4) Please ensure that the scale has no other contact to the floor than by the four wheels after the patient has
been seated onto the chair scale.
Power supply
Power is supplied either by the rechargeable battery in the display unit or by the mains power via the supplied
power unit. The imprinted voltage value at the mains adapter must match the local mains voltage.
After checking same connect the mains cable to the indicator and to a socket.
Note: The wall socket must be located near to the unit and be easily accessible. Please use only the mains
adapter supplied by ADE. The mains adapter is charging the battery pack at the same time.
When the battery is being charged for the first time a sufficient charging period of approx. 24 hours is neces-
sary to achieve a full battery load.
In case the scale is being used with batteries only and the display indicates – Lo, the battery should be re-
charged with the ADE mains adapter. After the first charging period the battery need 12-16 hours. The battery
should be charged while the scale is switched off. Upon completion of the charging period switch the scale on
again to check the battery status. In case Lo- still appears on the display inform your service partner.
M403020-210322-Rev006-UM-e
Introduction
Assembly and set up
3