Cooey WHT1-808-B User Manual - Page 3

Browse online or download pdf User Manual for Blood Pressure Monitor Cooey WHT1-808-B. Cooey WHT1-808-B 17 pages.

Print Page

INTRODUCTION

General Description

* Thank you for selecting COOEY Blood pressure Monitor (WHT1-808-B).

The monitor features blood pressure measurement, pulse rate measurement

and the result storage. The design provides you with two years of lifetime.

* This manual contains important safety information and caution, and provides

step by step instructions for using the product.

* Please do read this user manual carefully and thoroughly before use.

FEATURES:

86.1mm×24mm Blue LCD Display with White Backlight

Measure-during-inflating Technology

Up to 60 pieces of record stored

Indications for Use

The Cooey Blood Pressure Monitor is digital monitors intended for use

in measuring blood pressure and heartbeat rate with arm circumference

ranging from 22 cm to 32 cm ( about 9-13 inches ).

It is intended for adult indoor use only.

Measurement Principle

This product uses the Oscillometric Measuring Method to detect blood pressure.

Before every measurement, the unit establishes a "zero point" equivalent to the

atmospheric pressure. Then it starts inflating the cuff. Meanwhile, the unit detects

pressure oscillation generated by beat-to-beat pulsatile, which is used to deter-

mine the systolic pressure and diastolic pressure as well as pulse rate.

The device also compares the longest and the shortest intervals of detected

pulse wave to with the average value, and then calculates the standard deviation.

The monitor will light up a warning symbol when the calculated standard deviation

is larger than or equal to 15.

Safety Information

The below signs might be in the user manual, labeling or other components.

They are the requirement of standard and using.

Symbol for "THE OPERATION

GUIDE MUST BE READ"

Symbol for "COMPLIES WITH

MDD 93/42/EEC REQUIREMENTS"

Symbol for "MANUFACTURER"

Symbol for "SERIAL NUMBER"

Symbol for "Including RF

transmitter"

Symbol for "MANUFACTURE

DATE"

Symbol for " Class II Equipment"

INTRODUCTION

Symbol for "TYPE BF APPLIED

PARTS"

Symbol for "ENVIRONMENT

PROTECTION - Wast electrical products

should not be disposed of with

household waste. Please recycle where

facilities exist. Check with your local

authority or retailer for recycling advice"

Symbol for "DIRECT CURRENT"

Symbol for "Authorised Representative

EC REP

in the European Community

T1A/250V Φ3.6*10CCC

Symbol for indoor use only