Aussie Pumps QP Installation, Operation And Maintenance Manual - Page 8
Browse online or download pdf Installation, Operation And Maintenance Manual for Water Pump Aussie Pumps QP. Aussie Pumps QP 8 pages.
Print Page
6. LIFTING THE PUMP
Never use the cord to aid in lifting the pump.
7. PUMP MAINTENANCE AND REPAIR
Be sure the pump is disconnected from the power of the appropriate
circuits are dead and locked out before doing any maintenance or repair
work on the pump.
8. MOTOR OVERLOAD
Do not exceed the manufacturer's recommendation for maximum lift or
discharge head, as this could cause the motor to overheat. Use
appropriate circuit breaker for fuse.
9. EXPLOSIVE ATMOSPHERE
Unless the pump has been designed for it, never use it in any kind of
possible explosive atmosphere.
CAUTION: Irrespective of pump material of construction or
elastomer type, ALWAYS flush pump with fresh water after
use if other than clean fresh water has been pumped.
Ph (02) 9894 4144 Fax: (02) 9894 4240 Email:
RELIABLE PRODUCTS...........................................RELIABLE PEOPLE
CARE OF ATTENTION, CAUTION LABELS
1) Always keep labels clean without stain or
mud to clearly recognize the caution details.
2) Use new labels if original labels have become
obliterated.
3) Certainly stick the labels on the same place
as before when parts with labels are changed
by repairing something.
AUSTRALIAN PUMPS INDUSTRIES
7 GLADSTONE ROAD CASTLE HILL NSW 2154
Page
8
document number: QPWP151204
Australian Pump Industries