4O3A Rotator Genius Manual - Page 3

Browse online or download pdf Manual for Controller 4O3A Rotator Genius. 4O3A Rotator Genius 20 pages.

Print Page

As soon as you power the device the LED display will show azimuth values for the connected sensors. If the

sensors are not connected, azimuth values will be shown as N/A (not available).

2.1 Buttons and Controls

The bottom of the device features three buttons. The buttons have dual functions. They are used for either

manual control of your rotors or configuration.

Select Rotator

Pressing and releasing this button instantly (releasing under one second) toggles rotor

①

selection. If R1 is selected it will select R2 and vice versa. On the front LCD display you will see the ➡ symbol

next to the selected rotor (# was used in earlier versions). On the picture below R1 is currently selected.

②

Pressing and holding this button rotates the currently selected rotor in clockwise direction. The green

CW led on the front of the device will light up, and the arrow on the display next to the selected rotor will start

moving.

CCW

Pressing and holding this button rotates the currently selected rotor in counter clockwise direction. The

③

green CW led on the front of the device will light up, and the arrow on the display next to the selected rotor will

start moving.

④

Press and hold this button for two seconds to enter the settings menu. RG app will be offline and you

won't be able to control your rotors while using this menu. Details about these settings are covered in the next

chapter.

▲

Pressing and releasing this button instantly while in the settings menu scrolls trough the menu items in the

⑤

right direction. If a value is selected it will increment the selected value.

▼

Pressing and releasing this button instantly while in the settings menu scrolls trough the menu items in the

⑥

left direction. If a value is selected it will decrement the selected value.

⬆

Back to table of contents

Page 3