Datavideo DAC-200 Installation Manual - Page 12
Browse online or download pdf Installation Manual for Media Converter Datavideo DAC-200. Datavideo DAC-200 16 pages. Important note to make dac-200 work with pinnacle dv500:
Also for Datavideo DAC-200: Getting Started (13 pages), Reference Manual (1 pages), Important Notes (9 pages)
Print Page
- 1. Table of Contents
- 2. Warnings and Precautions
- 3. Warranty
- 4. Disposal
- 5. FCC & CE Certification (Radio & Television Interference)
- 6. What's in the Box
- 7. Key Features
- 7. Front Panel Control/Connection
- 7. Rear Panel Control/Connection
- 8. Operation Procedure
- 8. DIP Switch Settings
- 9. Installation / Connections
- 10. Connecting a PC / MAC NLE System to an Analogue VCR
- 11. Specification
- 12. Service & Support
Dip Switch settings to work with Windows & MAC Operation system
The DAC200 uses dip switches 4 and 5 to control the clocking frequency when it
is converting video, if the dip switches are not configured for your operating
system or type of device, a loss in video can occur. Please refer to dip switch
chart below and make sure that your DAC200 is setup correctly.
SMART DV is a patent pending feature that allows monitoring of the video during
a DV to DV capture.
Enabling SMART DV makes the converter transparent to an NLE system, while
still transcoding the live DV stream into analogue video. This enables users to
monitor a live digital video feed from a DV camcorder or DV deck during capture,
without any conflict. It means a huge saving of time for all video editors working
with DV tape.
NTSC System (USA)
MAC OS
NTSC System (USA)
Windows XP and Windows ME
PAL System (EU)
MAC OS
PAL System (EU)
Windows XP and Windows ME
NTSC System (USA)
Smart DV on
NTSC System (USA)
Camera
PAL System (EU)
Smart DV on
PAL System (EU)
Camera
11