ADE M601020 Operating Manual - Page 4

Browse online or download pdf Operating Manual for Scales ADE M601020. ADE M601020 16 pages. Class iii approved scales electronic bed scale

Print Page

When the battery is being charged for the first time a sufficient charging period of approx. 24 hours is neces-

sary to achieve a full battery load.

If the unit is in battery mode and the display indicates – Lo, the battery needed to be recharged with the mains

adapter. For a full battery load a charging period of 12-16 hours is required with the scale being switched off.

If–Lo still appears at the display inform your service partner.

Replacing the rechargeable battery

The battery compartment is located on the front of the unit.

1) Open the battery compartment.

2) Remove the battery cables carefully from the housing, connect the wires (red to red, black to black) and

insert the battery into the housing.

3) Close the battery compartment again.

Only use original rechargeable batteries and charger units from ADE. The warranty does not cover any dam-

age caused by using other types of batteries or charger units.

Tips for handling the batteries

The life of a battery depends essentially on the load, frequency of use, temperatures, settings and the acces-

sories used.

–

New batteries or batteries that have been stored for long periods require a longer charging period.

–

Charge the batteries at room temperature.

–

Never expose the batteries to temperatures below -10°C (14°F) or above 45°C (113°F).

–

Rechargeable batteries lose their charging capacity over the time and require a longer charging period

the older they are. If the battery performance drops considerably, then it is time to replace the battery.

–

New batteries are supplied in partial charged condition. Batteries achieve their full capacity after several

complete charge and discharge cycles.

–

Do not throw old rechargeable batteries into the domestic waste. Ensure that the valid legal and munici-

pal regulations of your country are being followed.

–

Never dispose of batteries in fire as they can leak or explode!

ADE products correspond to the applicable EC Directives and European standards to manufacture

and distribute world-wide medical devices as per the latest technical standards ensuring a long life

time and continuous reliability.

This symbol stands for compliance of the European Directive covering medical

devices and declares the conformity as per the Medical Device Law..

Approved scales classes III respecting the standards of the European guideline

covering approved scales are carrying this sign.

Scales carrying this symbol are approved and accredited within the European

M21

Community and fulfils first class demands for calibrated scales.

Products carrying this symbol meet the requirements as per:

 The valid EC Directive for non automatic scales

Quality features

in the latest version.

M601020-210322-Rev009-UM-e