DVIGear DVI-3580a Quick Start Manual - Page 5

Browse online or download pdf Quick Start Manual for Switch DVIGear DVI-3580a. DVIGear DVI-3580a 8 pages. 4k multiviewer switcher, scaler
Also for DVIGear DVI-3580a: Quick Start Manual (9 pages)

Print Page

4K MultiViewer Switcher / Scaler

Front Panel Layout

5. Screen Layout Buttons

6. Output Resolution Button

and LEDs

7. Power Indicator LED

8. Standby Button

Rear Panel Layout

16. Analog Audio Inputs

17. DP Inputs

18. VGA Input

19. USB Connector

20. LAN Connector

21. RS-232 Connector

22. Ground Screw

Quick Start Guide

Select from one of seven different MultiViewer layouts:

Single, Double, Triple, Quad 1, Quad 2, Quad 3, or Quad 4.

Press this button to cycle through and select the output resolution. The LED of

the selected resolution will light up. See pg. 8 for available output resolutions.

Lights when power is applied and the master power switch is ON.

Toggles the unit between standby and normal power modes. The green

indicator lights up when in standby mode.

Connect to the audio source devices using 3.5mm mini-stereo cables.

Connect to the DisplayPort source devices.

Connect to a source using an HD-15 cable or a YPbPr to VGA adapter cable.

This port is reserved for service personnel.

Connect to a network or PC to control the unit.

Connect to an RS-232 device. See the command list in the User Manual.

Attach the unit to an appropriate electrical ground. Consult an electrician.

See the warning on pg. 3.

DVI-3580a