DVO DIAMOND Seal Service & Casing Cleaning - Page 7
Browse online or download pdf Seal Service & Casing Cleaning for Bicycle Accessories DVO DIAMOND. DVO DIAMOND 10 pages.
Print Page25.
Use the 35mm seal press to install the
new seal.
26.
Use the rubber mallet to press in the
new seal.
27.
The new dust seals should sit flush in
.
the casting. Make sure the edges of
the seal are evenly pressed into
casting.
Repeat steps 24-27 for the second
seal.
28.
Grab the foam rings from the oil con-
tainer to insert them under the seal.
29.
The foam ring will sit under the seal
and right above the upper bushing.
30.
Apply a thin layer of grease on inside
of the seal.
//
pg. 9
//
pg. 10