Datavideo TP-300 Instruction Manual - Page 12

Browse online or download pdf Instruction Manual for Professional Video Accessories Datavideo TP-300. Datavideo TP-300 18 pages. Tablet

Print Page

PROMPTER KIT FOR TABLET

Turn on the tablet being used and launch the DV Prompter software. Prepare the prompting text to be

used. Also set up for the chosen optional remote control. See separate remote and DV Prompter manual or

the section on

Optional Bluetooth Teleprompter Remote

6. You should now be ready to start using the Prompter.

Camera Exposure and the 60/40 Glass

After setting up the camera with the 60/40 glass in front of the lens adjust the camera set up and white balance. This is

because the 60/40 Glass affects the camera exposure by approximately 1 stop almost like the effect of a neutral density

filter. Consult your camera manual for further help and advice with its exposure and white balance settings.

Control.

Put the configured tablet into the mounting bracket, item E,

and ensure it is held securely by adjusting the size of the

bracket holders for a snug fit and locking them in place. Use

locking lever on item E.

When using this TP-300 Prompter Kit you may need to use one

or both riser blocks to raise the camera up so that the camera

lens is positioned vertically as near to the middle of the 60/40

Glass as possible.

Two sets of screws are supplied for use with these riser blocks.

The longer screws are for use with two blocks and the shorter

screws when using only one block.

In some cases the blocks are not required at all.

TP-300