Austin VT-2758-A03 Assembly - Page 3
Browse online or download pdf Assembly for Fan Austin VT-2758-A03. Austin VT-2758-A03 3 pages.
Print Page
ASSEMBLY & INSTALLATION
VENT HOSE TUBE
STEP #1:
•
PREPARE MOUNTING AREA BY CREATING A CUTOUT
FOR THE VENT BASE TUBE TO PASS THROUGH.
(RECOMMENDED DIAMETER IS 3.50")
•
BASE WILL CONFORM TO NON-FLAT MOUNTING
SURFACE
•
ATTACH VENT BASE TO VEHICLE MOUNTING SURFACE
BY USING (CUSTOMER PROVIDED) #8 FASTENERS
THROUGH THE PROVIDED WASHERS.
STEP #2:
•
ATTACH VENTILATION HOSE TO THE 3" OR 4" SECTION
OF THE VENT HOSE ADAPTER.
•
THEN ATTACH VENT HOSE ADAPTER TO VENT BASE BY
USING TAPE AND/OR FASTENERS. (SEE ILLUSTRATION
TO RIGHT)
INFORMATION ON THIS DRAWING BELONGS TO AUSTIN HARDWARE AND MAY NOT BE REPRODUCED OR DISTRIBUTED WITHOUT PERMISSION.
3.50" (REF)
MOUNTING SURFACE (REF)
**NOTE**
IF INSTALLING ADAPTER PRIOR TO INSTALLING VENT:
•
4.25"
CUTOUT RECOMMENDED.
•
IT IS CRITICAL THAT YOU CENTER THE VENT BEFORE
MOUNTING TO ENSURE ALL FASTENERS ENGAGE MOUNTING SURFACE.
DIMENSIONS MAY CHANGE WITHOUT NOTICE
TEMPLATE REV 4/7/2011
STEP #3:
•
ATTACH VENT COVER BY SLIDING IT
BACKWARDS INTO THE VENT BASE.
•
MAKE SURE TO ALIGN THE MOUNTING
TABS TO THE MOUNTING SLOTS.
STEP #4:
•
LASTLY, SECURE VENT COVER BY INSERTING
(CUSTOMER PROVIDED) #8 / #10 FASTENER IN THE
REAR HOLE OF THE VENT.
•
NOW THE ENTIRE VENT ASSEMBLY IS SECURELY
CONNECTED THE VEHICLE.
CREATION DATE:
12-15-2014
CREATED BY:
austinhardware
THIRD ANGLE
www
com
.
.
PROJECTION
Sheet3 of 3
FILE NAME:
Y_VT-2758-A03
dlay
DESCRIPTION:
VENT ASSEMBLY
PART NUMBER:
VT-2758-A03
REV
K