Cook's essentials CM-GR103SA Owner's Manual - Page 10

Browse online or download pdf Owner's Manual for Grill Cook's essentials CM-GR103SA. Cook's essentials CM-GR103SA 18 pages. Electric bbq grill

Print Page

Assembly Instructions...

Step 5 – Lower Hinge Bracket (part #10b)

Hardware:

M5*12 small screws (part #17) – 2 pcs

flat washers (part #23) – 2 pcs

lock washers (part #22) – 2 pcs

flat nuts (part #24) – 2 pcs

Locate the Lower Hinge Bracket. Set aside two

(2) M5*12 small screws, two (2) flat washers,

two (2) lock washers and two (2) flat nuts. Place

the Lower Hinge Bracket on the Bowl as shown

here, and align the holes. Note the 'Up' marking

on the Lower Hinge Bracket. Through each hole,

insert a small screw from the outside of the

Lower Hinge Bracket through the Bowl. From

inside the Bowl, place a flat washer, then lock

washer on each screw and affix using the flat nuts.

Step 6 – Attach Upper Hinge Bracket (part #10a) to the Lid (part #1)

Hardware:

M5 small wing nuts (part #20) – 2 pcs

M5*12 small screws (part #17) – 2 pcs

flat washers (part #23) – 2 pcs

lock washers (part #22) – 2 pcs

Locate the Lid and the Upper Hinge Bracket. Set aside two (2) M5*12 small screws, two (2) flat washers,

two (2) lock washers and the two (2) small wing nuts. Place the Upper Hinge Bracket on the Lid as

shown below (on the side opposite the Cook's Essentials logo), and align the holes. Through each hole,

insert a small screw from the outside of the Upper Hinge Bracket through the Lid. From inside the Lid,

place a flat washer, then lock washer on each screw and affix using the small wing nuts.