DVS EC Reclaim User Manual - Page 2
Browse online or download pdf User Manual for Fan DVS EC Reclaim. DVS EC Reclaim 4 pages. Mechanical ventilation with heat recovery (mvhr)
Print Page
Displayed on the home screen
Main Display
Will show fan operation Indication.
Moving symbol = Fan On
Static symbol = Fan Off
Temperature Display
By pressing the Temperature
Display button you can check the
Temperature at the control panel
and the Supply Air Temperature
in the system fan. The associated
LED will illuminate indicating
which temperature you are
viewing. You can toggle between
each by pressing more than once.
Main display
Fan on / off indication:
Pressing either
or
will change to displaying the FAN ON or FAN OFF indication.
Heat purge and High temperature shut off functions
Programmable automatic Heat purge function
(This function can be turned off or on and adjusted by the user)
The system has a pre-programmed Heat Purge Function available. The installer has
programmed this, matching the air flow rates to your home, when the system was installed.
When turned on by the user, this function increases the air flow rate automatically
through the system when the supply air temperature, (measured in the air supply fan)
rises above the pre-set temperature. The purge temperature is typically set to 27
can be adjusted by the user. If the fresh air intake (outside the home) is cooler than the
system temperature, this helps to purge the system of built-up heat, this in turn means the
system will operate for longer on warm days when it would otherwise shut down on high
temperature (if the high temperature shut off is activated).
Note: In a standard set up, this function is turned off.
DVS
EC Reclaim | User Guide
®
System On / Off
Press for 2 seconds to
turn the system On / Off.
while displaying House temperature or Supply temperature
LED Indicators
See Temperature
Display.
Air Supply
To increase
or decrease
the calibrated
condensation
control setting
(air supply rate)
press Increase or
Decrease.
C. This
o