Austin Hughes RP-F821 User Manual - Page 15
Browse online or download pdf User Manual for Industrial Monitor Austin Hughes RP-F821. Austin Hughes RP-F821 19 pages. 8u rackmount display panel
< 3.2 > Options : MCS
( Multi-display Control )
Audio
HDMI
out
VGA
***
Please download the protocol of MCS control at :
http://www.austin-hughes.com/support/usermanual/cyberview/UM-CV-MCS.pdf
***
For MCS option, casing depth will be changed.
RS-232C
15 feet serial cable
( over 15 feet, extender required )
OUT
LINK
RJ-45 jack
UM-CV-751-RP-F821-Q220V1
More control is always good. Especially when it is necessary and
easy. Austin Hughes provides MCS solution to control the OSD of
various CyberView LCD display up to 64 units.
The RS-232C is used for the communication between the PC and the
fi rst display via a 15 feet serial cable while the CAN bus is used for the
various LCD displays cascade together via CAT 5/6 cable, and daisy
chain up to 1,000 meters.
Designed for use with CyberView LCD displays, Austin Hughes
provides a MCS input module without using additional space or power
and it comes standard with a 2-year warranty.
Power
BNC
in
PC
DVI-D
IN
Cat5 / 6 cable
max. 300 meters
Daisy chain up to 1,000
meters and 64 displays
MCS
set
out
in
Link
OUT
IN
Cat5 / 6 cable
max. 300 meters
P.11
RP-F821
Set switch
For the 1st and last display,
push the set switch upward
For other daisy chain displays,
push the set switch downward
OUT
IN
Cat5 / 6 cable
max. 300 meters
up to 64 displays
www.austin-hughes.com
OUT