ADE ZW60-45 Operating Manual - Page 6
Browse online or download pdf Operating Manual for Scales ADE ZW60-45. ADE ZW60-45 20 pages. Electronic table scales
Print Page
MR
Memory recall
MC
Clear memory
Piece
SMPL
counting
mode
Manual
U.WT.
weight entry
Maximum
HI LIMIT
value check
LOW
Minimum
LIMIT
value check
Manual entry
0...9 / •
of values
Clear
manually
C
entered
values
5.3
Display symbols
The LCD display shows a value and the unit.
In addition, the display shows symbols for tare (TARE), gross weight (GROSS), zero position
(ZERO) and low bat-tery charge.
Symbol
Meaning
Battery
Battery charging required.
STABLE
The weight shown on the display is stable.
ZERO
The scale is in zero position.
GROSS
The weight shown on the display is the gross weight.
NET
The weight shown on the display is the net weight.
PCS
The scale is in piece counting mode.
%
The scale is in percent weighing mode.
M+
The display shows the result from the totaliser.
6
Memory recall button. Displays the summed total weight from the
memory.
Memory clear button. Clears the summed total weight from the
memory.
If the scale is in weighing mode, this button switches it to
counting mode.
If the scale is in counting mode, this button switches it back to
weighing mode
Manual entry of a known weight value.
Recalls the stored maximum weight value in weighing mode or
the maximum quantity in counting mode. If the applied weight or
the applied quantity exceeds the maximum value, you will hear
an audible signal.
To enter the value, press and hold down this button for 3
seconds.
Recalls the stored minimum weight value in weighing mode or
the minimum quantity in counting mode. If the applied weight or
the applied quantity is smaller than the minimum value, you will
hear an audible signal.
To enter the value, press and hold down this button for 3
seconds.
Numeric buttons from 0 to 9 are used to manually enter values
such as unit weight or reference quantity.
Clears manually entered values.
ZW60-210531-Rev006-UM-en