Austlift 915230 User Instructions - Page 7

Browse online or download pdf User Instructions for Lifting Systems Austlift 915230. Austlift 915230 12 pages. Retractable fall arrester

Print Page

3. Allow adequate clearance of minimum 4 meters below, in order to avoid collision with the

adjacent structures or the ground in the event of a fall.

4. To attenuate a drop ending in a pendulum movement, the working area or lateral movements

to both sides of the centre axis shall be limited to a maximum of 1.50 m. In other cases, no

individual anchor points, but, eg., type C or type D anchor devices in accordance with EN

795:2012 shall be used.

a. The Retractable Fall Arrester Block can also be used with Type C anchor device.

b. The defiection of the anchor device shall be taken into account when determining the

clearance required below the feet of the user. To that effect, the indications specified in the

instructions for use of the anchor device shall be considered.

c. Care must be taken to avoid collision with any obstruction in the event of a fall.

d. It is advised that, for the event of a fall over the edge, special pre-planned rescue measures

must be taken under the guidance of a well-trained and competent personnel.

INSTRUCTION FOR MAINTENANCE

• In case of minor soiling, wipe the equipment with cotton cloth or soft brush. Do not use any

abrasive material. For intensive cleaning wash in water at a temperature between 250C to

500C using a neutral detergent. It should be allowed to dry by itself and be kept away from

open fire or any other source of heat, Avoid direct sunlight.

• Store in cool dry place, preferably away from moisture, direct sunlight, extra acidic or basic

conditions & sharp edges.

When not in use, store the equipment in a well-ventilated area away from extremes of

temperature. Never place heavy items on top of it. If the product is wet, allow it to dry fully

before placing it into storage.

All AUSTLIFT products bear 1-year warranty against manufacturing defects, applicable on

Unused AUSTLIFT products, from the date of purchase. However, AUSTLIFT shall not be liable for

any accident or damage while the product is in use.

The estimated product lifespan of this product is 10 years from the date of manufacturing. The

following factors can reduce the lifespan of the product : intense use, contact with chemical

substances, specially aggressive environment, extreme temperature exposure, UV exposure,

abrasion, cuts, violent impacts, bad use or maintenance.

STORAGE AND TRANSPORT

LIFESPAN

915207