Austlift 915510 User Manual - Page 2

Browse online or download pdf User Manual for Camera Accessories Austlift 915510. Austlift 915510 8 pages. Tripod double head

Print Page

WARNING!! READ THIS INSTRUCTION MANUAL CAREFULLY

BEFORE USING THIS EQUIPMENT, FAILURE TO DO SO MAY

RESULT IN SERIOUS INJURY OR DEATH.

Australian Lifting Centre, 43 Frank St Wetherill Park, NSW 2164

Tel: +61 2 9757 2277, Fax: +61 2 9757 2922, www.austlift.com.au

CAREFULLY READ THESE INSTRUCTIONS BEFORE USING THIS EDGE ANCHOR

User Instructions must always be available to the user and are not to be

removed except by the user of this equipment. For proper use, see supervisor,

User Instructions, or contact the manufacturer. Compliant fall protection and

emergency rescue systems help prevent serious injury during fall arrest. Users and

purchasers of this equipment must read and understand the User Instructions

provided for correct use and care of this product. All users of this equipment

must understand the instructions, operation, limitations and consequences of

improper use of this equipment and be properly trained prior to use per OSHA 29

CFR 1910.66 and 1926.503 or applicable local standards. Misuse or failure to follow

warnings and instructions may result in serious personal injury or death.

Tripod 915507 and 915510 are designed to minimize the risk of/provide protection

against the danger of falling from heights. However, always remember that no

item of PPE can provide full protection and care must always be taken while

carrying out the risk related activity.

PERFORMANCE AND LIMITATIONS OF USE:

These Tripod have been tested in accordance with AS/NZS 5532:2013 and have

achieved the following performance levels:

AS/NZS 5532:2013

Static Strength

(Clause 6.3.1.1)

Dynamic

Performance

(Clause 6.3.2)

LIMITATIONS:

•

Tripod should be a personal property of its user.

1300 100 120

AUSTLIFT TRIPOD DOUBLE HEAD

Result/Comment

Sustained a force of 15 kN for 3 minutes. (PASS)

When tested with rigid steel mass of 100 kg, the test

mass held after test with the device remaining stable

throughout. (PASS)